316 Stainless Steel Push in Fittings | 316 Stainless Steel Push to Connect Fittings
316 stainless steel push in fittings (stainless steel push to connect fittings, stainless steel pneumatic fittings) are designed for air, pneumatic, food & beverage, chemical, medical & pharmaceutical systems. Pneuflex's stainless steel push in fittings are suitable for use with both hard and soft tubing. 316 stainless steel push in fittings can be installed and removed tubing easily (to remove tubing by pressing the release ring and pulling the tube out from the fitting). Pneuflex's 316 Stainless steel push in fittings come in a variety of types, models and sizes to satisfy various piping demands and provide essential links between components. Designed for use with polyurethane, polyethylene, nylon and teflon tubing to accommodate metric tubing O.D ranging from 4 mm to 16 mm and inch (imperial) tubing O.D from 1/8" to 1/2".
Advantages of Pneuflex's 316 Stainless Steel Push in Fittings:
- 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel
- Suitable for food and beverage process, paper, petrochemical, pharmaceutical, chemical, medical
- Elbow, Tee, Y and Banjo with thread allow 360° rotation of the body for ease of installation in confined spaces
- FKM (Viton) Sealing inside
- Handle pressures up to 290 psi (20 bar) and an operating temperature range of -20 to +150°C (-4 to +302°F)
Technical Characteristics
| Fluid Admitted | Air, Vacuum, Water (no freezing), Steam |
| Working Pressure | 0—2.0 MPa | 0—290 psi |
| Proof Pressure | 3.0 MPa | 435 psi |
| Negative Pressure | -100 Kpa | -29.5 In Hg |
| Working Temperature | -20—150°C | -4—302°F |
| Applicable Tube | PU / PA / PE / Teflon Tubing |
| Body | 316 Stainless Steel |
| Seal, O-ring | FKM (Viton) |
| Lock Claw | 316 Stainless Steel |
