BPBF Female Branch Tee | Nickel Plated Brass Push in Fitting | Brass Fitting | Nickel Plated Brass Push to Connect Fitting
BPBF nickel plated brass push in fitting female branch tee connects two tubes to a male threaded connection at 90-degree angles from the middle of the tee. The body of nickel plated brass push in fitting female branch tee with threaded connections can be rotated after installation to allow for variations in tube direction. Nickel plated brass push in fitting female branch tee is made of nickel-plated brass for durability and corrosion resistances. Female branch tee nickel plated brass push in fittings can be used with polyethylene, polyurethane, FEP & nylon tubing. The flexible tubing is easily connected by simply inserting the tubing end into the fitting. To release the tubing, press the circular release ring and the tubing can be easily pulled out. In this category you can find push-in fittings with threads in following sizes: R, PT, BSPT 1/8 to R, PT, BSPT 1/2, and NPT 1/8 to NPT 1/2 for hoses with diameter from 4 mm to 16 mm and 1/8" to 1/2".
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Thread Size: From BSPT 1/8 to BSPT 1/2; 10-32UNF to 1/2NPT
Body Material: Nickel Plated Brass
Thread Material: Nickel Plated Brass
Sealing: NBR
Working Pressure: 0—2.0MPa | 0—290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20～150°C | -4～302°F