SPEG Union Tee Reducer | Stainless Steel Push in Fittings, Push to Connect Fittings
SPEG stainless steel push in fitting union tee reducer is used to connect two tubes of the same diameter inline with a third tube of a smaller diameter at right angle. Stainless steel push in fitting union tee reducer is made of 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel; the FKM sealing material is chemical-resistant. These stainless steel push to connect fittings are designed to withstand corrosive environments (substances), to channel aggressive fluids and to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. Union tee reducer stainless steel fittings are available in both inch and metric sizes, and can be used with a variety of tubing material includes FEP, PFA, nylon, soft nylon, polyurethane, polyethylene or Telfon. In this category you can find stainless steel push-in fittings for hose with diameter from 4 mm to 16 mm and 1/8" to 1/2".
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Push-in Tubing O.D: From 4 mm to 16 mm and 1/8" to 1/2"
Body Material: 316 Stainless Steel
Sealing: FKM (Viton)
Working Pressure: 0—2.0 MPa | 0—290 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20～150°C | -4～302°F