SPLL Extended Male Elbow | Stainless Steel Push in Fitting, Stainless Steel Push to Connect Fitting
SPLL stainless steel push in fitting extended male elbow is used to connect tubing to female thread at a right angle. When you need to mount two fittings next to each other, extended male elbow stainless steel push in fitting is high enough that you can fit classic male elbow elbow below to prevents interference among fittings. Stainless steel push in fitting extended male elbow is made of 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel; the FKM sealing material is chemical-resistant. These stainless steel fittings are designed to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. Extended male elbow stainless steel push to connect fittings have swivel (rotate 360°) hexagonal thread allowing tightening with flat spanner. In this category you can find stainless steel push-in fittings with threads in following sizes: R, PT, BSPT 1/8 to R, PT, BSPT 1/2, and 10-24 UNC, 10-32 UNF, 1/8 NPT to 1/2 NPT, for hoses with diameter from 4 mm to 16 mm and 1/8" to 1/2".
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Thread Size: From BSPT 1/8 to BSPT 1/2; 10-24 UNC to 1/2 NPT
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Sealing: FKM (Viton)
Working Pressure: 0—2.0 MPa | 0—290 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20～150°C | -4～302°F