SPH-G Male Banjo Elbow, BSPP, G Thread Stainless Steel Push in Fittings, Stainless Steel Push to Connect Fittings

SPH-G stainless steel push in fitting male banjo elbow connects a metric or inch tubing to a female BSPP, G thread threaded connection at a right angle. BSPP, G thread male banjo elbow with hexagon socket on the top allows tightening with a hexagon wrench or flat spanner. The male BSPP, G thread seals with use of an FKM / Viton o-ring. BSPP, G stainless steel push in fitting male banjo elbow is made of 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel; the FKM sealing material is for chemical-resistant. These stainless steel fittings are designed to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. Male banjo elbow stainless steel fittings can be used with a variety of tubing materials. You can find stainless steel push-in fitting male banjo elbow with threads in following sizes: G, BSP, BSPP 1/8 to G ,BSP, BSPP 1/2, for hoses with diameter from 4 mm to 16 mm and 1/8" to 1/2".

Part #: SPH-G Male Banjo Elbow
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Thread Size: From G (BSP, BSPP) 1/8 to G (BSP, BSPP) 1/2
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Sealing and O-ring: FKM (Viton)
Working Pressure: 0—2.0 MPa | 0—290 psi
Proof Pressure: 3.0 Mpa | 435psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20～150°C | -4～302°F