SJSC-G Flow Control Valve, Flow Control Regulator, BSPP, G Thread Stainless Steel Push in Fittings

SJSC-G BSPP, G thread stainless steel push in fitting flow control valve (flow control regulator) provides accurate flow regulation for precise speed control of pneumatic cylinders as well as gas flow in environments with high mechanical or chemical constraints.  It two ports and a adjustment screw to restrict or direct flow through the valves, and the position of the needle is adjusted to determine the rate of flow, lock nut guaranteeing stability of adjustment. BSPP,G thread stainless steel push in fitting flow control valve (flow control regulator) is made of 316 stainless steel for corrosion resistance; the FKM seal O-ring is chemical-resistant. These stainless steel flow control valve (flow control regulator) is designed to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. In this category you can find push-in fittings with threads in following sizes: G, BSP, BSPP 1/8 to G, BSPP 1/2, for hoses with diameter from 4 mm to 16 mm and 1/8" to 1/2". Control-out and control-in flow control valves (flow control regulators) are available.

Control-out flow control valve controls the flow rate of air entering from the thread side can be controlled, whereas air entering from the tube side comes out from the thread side at the same (not controlled) flow rate.

Control-in flow control valve controls the flow rate of air entering from the tube side can be controlled, whereas air entering from the thread side comes out from the tube side at the same (not controlled) flow rate.

Part #: SJSC-G Flow Control Valve / Flow Control Regulator
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Thread Size: From G (BSP, BSPP) 1/8 to G (BSP, BSPP) 1/2
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Sealing and O-ring: FKM (Viton)
Working Pressure: 0—2.0 MPa | 0—290 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20～150°C | -4～302°F