SJSC 12-N02, 12 mm O.D Tubing to 1/4 NPT Flow Control Regulator Stainless Steel Push in Fitting
Pneuflex SJSC 12-N02, stainless steel flow control regulator has a male 1/4 NPT thread and a 12 mm O.D tubing connection at a 90-degree angle, provides accurate flow regulation for precise speed control of pneumatic cylinders as well as gas flow in environments with high temperature, mechanical or chemical constraints. 12 mm x 1/4 NPT flow control regulator stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM sealing material for chemical-resistance. 12 mm O.D tubing to 1/4 NPT thread stainless steel flow control regulator is designed to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. Control-out and control-in flow control valves are available.
Thread Size: 1/4 NPT
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS
Dimensions of SJSC 12-N02, 12 mm O.D Tubing to 1/4 NPT Thread Flow Control Regulator Stainless Steel Push in Fitting
| Part No. | TUBE | R | L1 | L2 | L3 | D1 | CH |
| SJSC 12-N02 | 12mm | 1/4 NPT | 45mm | 36mm | 9.5mm | 20.5mm | 14mm |