BPOC 10-01 10 mm Tube O.D x R, PT, BSPT 1/8 Thread Round Quick Straight Connector Nickel Plated Brass Pneumatic Fitting
Pneuflex BPOC 10-01 nickel plated brass pneumatic fitting round quick straight connector with 5mm internal hexagonal hole is used to quick connect 10 mm tube to R, PT, BSPT 1/8 thread, which can achieve line connected or disconnected without other tools easily. After the tube is connected and installed, pull the tube to make sure that the tube cannot pull out the brass fitting. 10 m tube OD x R, PT, BSTPT 1/8 thread round quick straight connector nickel plated brass pneumatic fitting is suitable for use up to the maximum working pressure of the plastic tubing used, also suitable for vacuum service. Don't use this metal brass push to connect round male straight fitting in areas whose working temperature is above 150°C.
Part #:
BPOC 10-01
Push-in Tubing O.D:
10mm
Thread Size: PT, R, BSPT 1/8
Fluid Admitted: Air, Vaccum, Water*
Body Material: Nickel Plated Brass
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
Thread Size: PT, R, BSPT 1/8
Fluid Admitted: Air, Vaccum, Water*
Body Material: Nickel Plated Brass
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
Dimensions of BPOC 10-01 10 mm Tube O.D x R, PT, BSPT 1/8 Thread Round Quick Straight Connector Nickel Plated Brass Pneumatic Fitting
| Part No. | TUBE ФD | R | A | B | ФP | H |
| BPPC 10-01 | 10mm | R1/8 | 7mm | 32mm | 16mm | 5mm |
There are no reviews for this product.
Write a review
BadExcellent