SPL 10-N01, 10 mm O.D Tubing, 1/8 NPT Thread Male Elbow Stainless Steel Push in Fitting
Pneuflex SPL 10-N01 male elbow stainless steel push in fitting (stainless steel push to connect fitting) connects a 10 mm O.D nylon, polyurethane, polyethylene or Teflon tubing to a female 1/8 NPT threaded connection at a 90-degree angle. The body of male elbow stainless steel push in fitting can be rotated after installation. 10 mm x 1/8 NPT thread male elbow stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM sealing material for chemical-resistance. 10 mm O.D tubing, 1/8 NPT thread male elbow stainless steel push to connect fitting is suitable for use with air, water, oil and steam in high temperature and wash-down applications. External tightening with a flat wrench.
Part #:
SPL 10-N01
Push-in Tubing O.D:
10mm
Thread Size: 1/8 NPT
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS
Thread Size: 1/8 NPT
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS
Dimensions of SPL 10-N01, 10 mm O.D Tubing, 1/8 NPT Thread Male Elbow Stainless Steel Push in Fitting
| Part No. | TUBE | R | L1 | L2 | L3 | D1 | CH1 | CH2 |
| SPL 10-N01 | 10mm | 1/8 NPT | 30.5mm | 27mm | 8mm | 17.5mm | 13.2mm | 17mm |
There are no reviews for this product.
Write a review
BadExcellent