BPL 10-03 | 10 mm O.D Tube x R, PT, BSPT 3/8 Thread Swivel Male Stud Elbow | Nickel Plated Brass Push in Fitting
Pneuflex BPL 10-03 swivel male stud elbow nickel plated brass push in fitting ( brass push to connect fitting) is designed to for use with 10 mm Nylon, Polyethylene and Polyurethane tube to connect a female R, PT, BSPT 3/8 threaded port at a 90-degree angle. Nickel plated brass body ensures anti-contamination properties for an extended life. Rated for up to 290 PSI (20 bar ). Working temperature: -20° to 302° Degree's Fahrenheit (-20°C up to 150°C). Swivel male stud elbow nickel plated brass push in fitting can be connected and disconnected easily. Insert tube into brass push-in fitting up to the stop. By pressing the release collar and concurrent drawing of hose, the plastic tube can be dismounted again. After hose connection, it must be ensured that the hose does not undergo any tensile load and the minimum bending radius is respected.
Thread Size: PT, R, BSPT 3/8
Fluid Admitted: Air, Vaccum, Water*
Body Material: Nickel Plated Brass
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
Dimensions of BPL 10-03 10 mm O.D Tube x R, PT, BSPT 3/8 Thread Swivel Male Stud Elbow Nickel Plated Brass Push in Fitting
| Part No. | D | R | E | B | A | P | H |
| BPL 10-03 | 10mm | R3/8 | 30mm | 28mm | 9.5mm | 16mm | 17mm |