SPH1/4-M5, 1/4" O.D Tubing, M5 x 0.8 Thread Male Banjo Stainless Steel Push in Fitting
Pneuflex SPH 1/4-M5 male banjo stainless steel push in fitting (stainless steel push to connect fitting) connects a 1/4" O.D nylon, polyurethane, polyethylene or Teflon tubing to a female M5 x 0.8 threaded connection at a 90-degree angle. Stainless steel push in fitting male banjo has hexagon head to allow tightening with a wrench or spanner in confined spaces. The male M5 x 0.8 thread seals with use of an FKM (Viton) o-ring. The body of male banjo stainless steel push in fitting can be rotated after installation. 1/4" x M5 male banjo stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM sealing material for chemical-resistance. 1/4" O.D tubing, M5 x 0.8 thread male banjo elbow stainless steel push in fitting is suitable for use with air, water, oil and steam in high temperature and wash-down applications.
Thread Size: M5 x 0.8
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS
Dimensions of SPH 1/4-M5, 1/4" O.D Tubing, M5 x 0.8 Thread Male Banjo Stainless Steel Push in Fitting
| Part No. | TUBE | R | L1 | L2 | L3 | D1 | CH |
| SPH 1/4-M5 | 1/4" | M5 x 0.8 | 22mm | 26mm | 4mm | 11mm | 12mm |